EasyManuals Logo

HP ProCurve 2810 Series Access Security Guide

HP ProCurve 2810 Series
326 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #193 background imageLoading...
Page #193 background image
8-7
Configuring Port-Based and Client-Based Access Control (802.1X)
Terminology
Terminology
802.1X-Aware: Refers to a device that is running either 802.1X authenticator
software or 802.1X client software and is capable of interacting with other
devices on the basis of the IEEE 802.1X standard.
Authorized-Client VLAN: Like the Unauthorized-Client VLAN, this is a
conventional, static VLAN previously configured on the switch by the
System Administrator. The intent in using this VLAN is to provide authen-
ticated clients with network services that are not available on either the
port’s statically configured VLAN memberships or any VLAN member-
ships that may be assigned during the RADIUS authentication process.
While an 802.1X port is a member of this VLAN, the port is untagged. When
a port loses its authenticated client connection, it drops its membership
in this VLAN. Note that with multiple clients on a port, all such clients use
the same untagged, port-based VLAN membership.
Authentication Server: The entity providing an authentication service to
the switch when the switch is configured to operate as an authenticator.
In the case of a switch running 802.1X, this is a RADIUS server (unless
local authentication is used, in which case the switch performs this
function using its own username and password for authenticating a
supplicant).
Authenticator: In ProCurve applications, a switch that requires a supplicant
to provide the proper credentials before being allowed access to the
network.
CHAP (MD5): Challenge Handshake Authentication Protocol.
Client: In this application, an end-node device such as a management station,
workstation, or mobile PC linked to the switch through a point-to-point
LAN link.
Client-Based Authentication: The 802.1X extension in the switches cov-
ered in this guide. In this operation, multiple clients on the same port must
individually authenticate themselves.
Guest VLAN: See “Unauthorized-Client VLAN”.
EAP (Extensible Authentication Protocol): EAP enables network access that
supports multiple authentication methods.

Table of Contents

Other manuals for HP ProCurve 2810 Series

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProCurve 2810 Series and is the answer not in the manual?

HP ProCurve 2810 Series Specifications

General IconGeneral
Jumbo Frame SupportYes
ModelHP ProCurve 2810 Series
Ports24 or 48 10/100/1000 ports
Uplink Ports4 SFP (mini-GBIC) slots
Forwarding Rate71.4 Mpps
LayerLayer 2
ManagementWeb, SNMP, CLI
MAC Address Table Size16000 entries
Routing ProtocolStatic IP routing
Form FactorRack-mountable
Power Consumption48W (24-port)
Operating Temperature32°F to 0°F (0°C to 0°C)
Operating Humidity15% to 95% non-condensing
Power SupplyInternal power supply

Related product manuals