To Next Page

To Previous Page

8-9

Configuring Port-Based and Client-Based Access Control (802.1X)

Terminology

designate as the Unauthorized-Client VLAN.) A port configured to use a

given Unauthorized-Client VLAN does not have to be statically configured

as a member of that VLAN as long as at least one other port on the switch

is statically configured as a tagged or untagged member of the same

Unauthorized-Client VLAN. An unauthorized-client VLAN is available on

a port only if there is no authenticated client already using the port.

Untagged Membership in a VLAN: A port can be an untagged member of

only one VLAN. (In the factory-default configuration, all ports on the

switch are untagged members of the default VLAN.) An untagged VLAN

membership is required for a client that does not support 802.1q VLAN

tagging. A port can simultaneously have one untagged VLAN membership

and multiple tagged VLAN memberships. Depending on how you

configure 802.1X Open VLAN mode for a port, a statically configured,

untagged VLAN membership may become unavailable while there is a

client session on the port. See also “Tagged Membership in a VLAN”.

HP ProCurve 2810 Series Specifications

General

HP ProCurve 2810 Series Access Security Guide

Other manuals for HP ProCurve 2810 Series