4. Remove the four 6-32 mounting screws (1) and slide the drive out of the bay (2).
Installing a 3.5-inch drive
1. Prepare the computer for disassembly (Preparation for disassembly on page 26)
2. Remove the access panel (
Access panel on page 27)
3. You can install a 3.5-inch hard drive or a 2.5-inch hard drive with a 3.5-inch adapter bracket
similar to the example shown below.
●
Slide the drive into the bay adapter bracket, ensuring the connector on the drive is fully
inserted into the connector on the adapter bracket.
48 Chapter 5 Removal and replacement procedures: Microtower
To Next Page
Loading...
