EasyManuals Logo

HP ProDesk 405 G1 Microtower User Manual

HP ProDesk 405 G1 Microtower
165 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #79 background imageLoading...
Page #79 background image
Computer Setup—Security
NOTE: Support for specific Computer Setup options may vary depending on the hardware
configuration.
Table 6-3 Computer Setup—Security
Option Description
Setup Password Allows you to set and enable a setup (administrator) password.
NOTE: If the setup password is set, it is required to change Computer Setup options, flash the
ROM, and make changes to certain plug and play settings under Windows.
Power-On
Password
Allows you to set and enable a power-on password. The power-on password prompt appears after
a power cycle or reboot. If the user does not enter the correct power-on password, the unit will not
boot.
Device Security Allows you to set Device Available/Device Hidden (default is Device Available) for:
Embedded security device
System audio
USB controller (varies by model)
Network controller
NOTE: You must disable AMT before trying to hide the network controller.
SATA ports (varies by model)
USB Security Allows you to set Enabled/Disabled (default is Enabled) for:
Front USB Ports
Rear USB Ports
Accessory USB Ports
Slot Security Allows you to disable any PCI or PCI Express slot. Default is enabled.
Network Boot Enables/disables the computer’s ability to boot from an operating system installed on a network
server. (Feature available on NIC models only; the network controller must be either a PCI
expansion card or embedded on the system board.) Default is enabled.
System IDs Allows you to set:
Asset tag (18-byte identifier), a property identification number assigned by the company to the
computer.
Ownership tag (80-byte identifier) displayed during POST.
Universal Unique Identifier (UUID) number. The UUID can only be updated if the current
chassis serial number is invalid. (These ID numbers are normally set in the factory and are used
to uniquely identify the system.)
Keyboard locale setting for System ID entry.
Computer Setup (F10) Utilities
69

Table of Contents

Other manuals for HP ProDesk 405 G1 Microtower

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP ProDesk 405 G1 Microtower and is the answer not in the manual?

HP ProDesk 405 G1 Microtower Specifications

General IconGeneral
BrandHP
ModelProDesk 405 G1 Microtower
CategoryDesktop
LanguageEnglish

Related product manuals