Power switch/LED assembly
Description Spare part number
Power switch/LED assembly 745050-001
1. Prepare the computer for disassembly (Preparation for disassembly on page 26).
2. Remove the access panel (
Access panel on page 27).
3. Remove the front bezel (
Front bezel on page 28).
4. Disconnect the cable from the system board connector labeled PB/LED.
NOTE: System board appearance may vary.
5. Press down on the top of the assembly to disengage the tab (1) that secures the assembly to the
chassis.
Power switch/LED assembly
53
To Next Page
Loading...
