Hardware options installation 55
10.
Remove the FlexibleLOM blank.
11. Install the component:
a. Firmly seat the FlexibleLOM in the slot.
b. Tighten the thumbscrew.
12. Install the PCI riser cage. ("Install the PCI riser cage" on page 21)
13. Install the processor air baffle ("Install the processor air baffle" on page 20).
14. Install the access panel (on page 19).
15. Slide the server into the rack.
16. Connect the LAN segment cables.
17. Connect each power cord to the server.
18. Connect each power cord to the power source.
19. Power up the server (on page 17).
20. If removed, install the rack bezel (on page 60).
To Next Page
Loading...
