HP PROLIANT DL180 - Optical Media Device Bay

Removal and Replacement Procedures 34
Figure 6 System Drive Bays
Item Description
1 Optical Media Device Bay
2 3.5 Inch Hard Disk Drive Bays (eight)
The HDD bays support both non-hot-plug and hot-plug SATA drives, as well as hot-plug SAS drives.
Optical Media Device Bay
The optical media device bay supports the installation of a 12.7mm DVD/CD R/RW ROM optical
drive.
To remove the optical drive carrier:
1. Remove the top cover.
2. Remove the top middle cover.
3. Remove the screw that secures the optical drive carrier to the chassis.
4. Push the carrier toward the front of the unit.
5. Pull the carrier out of the chassis.