Removal and Replacement Procedures 62
• DO NOT open the power supply unit. There are no serviceable parts inside it.
To remove the power supply:
1. Press the blue colored handle.
2. Slide the power supply out of the power supply bay.
Figure 52 Removing the power supply
To replace the power supply:
1. Align the power supply cage connector with the open slot of power supply, and slide the power
supply into the power supply bay until it snaps into place.
2. Snap the blue latch cover over port colored handle. Blue latch cover only installs one way.
Figure 53 Installing the power supply
To Next Page
Loading...
