Removal and replacement procedures 50
3.
Do one of the following:
o Extend the server from the rack (on page 29).
o Remove the server from the rack (on page 30).
4. Remove the access panel ("Access panel" on page 35).
5. Remove the PCI riser cage ("PCI riser cage" on page 46).
CAUTION: When connecting or disconnecting the capacitor pack cable, the connectors on the
cache module and cable are susceptible to damage. Avoid excessive force and use caution to
avoid damage to these connectors.
6. Disconnect the capacitor pack cable from the cache module.
7. Remove the cache module.
To replace the component, reverse the removal procedure.
Capacitor pack
To Next Page
Loading...
