Software and configuration utilities 79
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 79)
Online and Offline
Active Health System (on page 80)
Online and Offline
Integrated Management Log (on page 81)
Online and Offline
Intelligent Provisioning (on page 81)
Offline
HP Insight Diagnostics (on page 82)
Online and Offline
HP Insight Remote Support software (on page 82)
Online
Scripting Toolkit (on page 83)
Online
HP Service Pack for ProLiant (on page 83)
Online and Offline
HP Smart Update Manager (on page 83)
Online and Offline
HP ROM-Based Setup Utility (on page 83)
Offline
HP Smart Storage Administrator (on page 86)
Online and Offline
Option ROM Configuration for Arrays (on page 86)
Offline
ROMPaq utility (on page 87)
Offline
HP product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).
HP iLO Management Engine
The HP iLO Management Engine is a set of embedded management features supporting the complete
lifecycle of the server, from initial deployment through ongoing management.
HP iLO
The iLO 4 subsystem is a standard component of selected HP ProLiant servers that simplifies initial server
setup, server health monitoring, power and thermal optimization, and remote server administration. The iLO
4 subsystem includes an intelligent microprocessor, secure memory, and a dedicated network interface. This
design makes iLO 4 independent of the host server and its operating system.
iLO 4 enables and manages the Active Health System (on page 80) and also features Agentless
Management. All key internal subsystems are monitored by iLO 4. SNMP alerts are sent directly by iLO 4
regardless of the host operating system or even if no host operating system is installed.