Hardware options installation 61
14.
Remove the fan blanks.
15. Install the additional fans included in the processor option kit.
NOTE: A dual-processor configuration requires all eight fans. Some single-processor
configurations might already have five fans populated. Store any unused fans as spares.
16. Install the access panel (on page 20).
17. Install the server into the rack ("Installing the server into the rack" on page 27).
18. Power up the server (on page 17).
Expansion board options
The server has both full-height and low-profile expansion slots for controller option installation ("PCIe riser
board slot definitions" on page 10).
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP Product Bulletin website (http://www.hp.com/go/productbulletin).
To Next Page
Loading...
