Hardware options installation 40
16. Secure the locking latches.
17. Install the access panel (on page 23).
18. Slide the server into the rack.
19. Connect each power cord to the server.
20. Connect each power cord to the power source.
21. Power up the server (on page 20).
Memory options
IMPORTANT: This server does not support mixing LRDIMMs, RDIMMs, UDIMMs, or HDIMMs.
Attempting to mix any combination of these DIMMs can cause the server to halt during BIOS
initialization.
The memory subsystem in this server can support LRDIMMs, RDIMMs, UDIMMs, or HDIMMs:
To Next Page
Loading...
