Cabling 70
• LFF
DVD-ROM and DVD-RW drive cabling
Chipset SATA cable option
With the chipset SATA cable option, the chipset SATA controller can be used with a single SATA hard drive
that is installed in one hard drive bay of the SFF or LFF hard drive cage.
• When using the chipset SATA configuration, the following conditions apply:
o The 10 SFF drive configuration does not support the chipset SATA option.
o Only drive bay 1 is enabled. The remaining drive bays are disabled.
o The optical bay is disabled because the chipset SATA controller port on the system board is
redirected from the optical bay to the drive cage.
To Next Page
Loading...
