Need help?Do you have a question about the HP ProLiant DL585 and is the answer not in the manual?
Essential guidelines for safe installation and handling of the server to prevent injury.
Information on how to get help and what details to provide when contacting HP support.
Step-by-step instructions for turning on the server, including button usage.
Procedures for safely shutting down the server, including warnings about residual power.
Steps to safely pull the server out of the rack for maintenance or access.
Instructions for opening the server chassis by removing the access panel.
Guidelines for electrical connections, circuit loading, and grounding for safe operation.
Procedures and standards for properly grounding the server to prevent static discharge and ensure safety.
Detailed steps for mounting the server securely into a standard or telco rack.
Guide to connecting power cords and essential peripheral devices to the server's rear panel.
Information on supported memory types, installation guidelines, and population rules for memory boards.
Procedures for installing and replacing redundant hot-plug power supplies for continuous operation.
Details on PCI-X slots, bus speeds, and guidelines for installing expansion boards.
Overview of the RBSU for configuring server hardware settings and preparing for OS installation.
Instructions on using keyboard keys to navigate and interact with the RBSU menus.
Configuration settings within RBSU for OS selection, COM ports, and other system parameters.
Initial troubleshooting steps for common POST failures and power-on issues.
A guided process to diagnose system power and POST issues based on LED status.
Solutions for errors encountered after the server passes POST, including OS loading issues.
To Next Page
General