Installing hardware options
HP ProLiant DL585 Server User Guide 4-25
Hot-plug SAS or SATA hard drive guidelines
Figure 4-24: Hot-plug SAS or SATA hard drive ID
numbers
When adding SAS hard drives to the server, observe the following general
guidelines:
• The server supports eight SAS or SATA hot-plug hard drives.
• The system automatically sets all drive numbers.
• If only one hard drive is used, install it in the bay with the lowest number.
• Hard drives must be SFF types.
• Drives must be the same capacity to provide the greatest storage space efficiency
when drives are grouped together into the same drive array.
To Next Page
Loading...
