Installing hardware options
HP ProLiant DL585 Server User Guide 4-27
3. Close the ejector lever.
Figure 4-26: Installing a hot-plug SAS or SATA hard
drive
4. Be sure that the hot-plug hard drive activity LEDs on the front of the system are
illuminated, indicating that the system is functioning properly. For detailed
information on LEDs, refer to Appendix E, “System LEDs and switches.”
If any of the LEDs indicates an error, refer to Appendix H, “Troubleshooting,” or
refer to the HP Servers Troubleshooting Guide on the Documentation CD for
instructions.
To Next Page
Loading...
