Component identification 11
DIMM slot locations
DIMM slots are numbered 1 and 2. The supported AMP modes use the letter assignments for population
guidelines.
System maintenance switch
Position Default Function
S1
Off = iLO 4 security is enabled.
On = iLO 4 security is disabled.
S2
Off = System configuration can be
changed.
On = System configuration is locked.
S5
Off = Power-on password is enabled.
On = Power-on password is disabled.
S6
Off = No function
On = ROM reads system configuration
as invalid.
To access the redundant ROM, set S1, S5, and S6 to on.
When the system maintenance switch position 6 is set to the On position, the system is prepared to erase all
system configuration settings from both CMOS and NVRAM.
To Next Page
Loading...
