Software and configuration utilities 68
Software and configuration utilities
Server mode
The software and configuration utilities presented in this section operate in online mode, offline mode, or in
both modes.
Software or configuration utility Server mode
HP iLO (on page 68)
Active Health System (on page 69)
Integrated Management Log (on page 70)
Intelligent Provisioning (on page 71)
HP Insight Diagnostics (on page 72)
HP Insight Remote Support software (on page 70)
HP Insight Online (on page 71)
Erase Utility (on page 72)
Scripting Toolkit ("Scripting Toolkit for Windows and Linux" on page 71)
HP Service Pack for ProLiant (on page 73)
HP Smart Update Manager (on page 73)
HP ROM-Based Setup Utility (on page 73)
Array Configuration Utility (on page 76)
Option ROM Configuration for Arrays (on page 77)
ROMPaq utility (on page 77)
Product QuickSpecs
For more information about product features, specifications, options, configurations, and compatibility, see
the product QuickSpecs on the HP website (http://www.hp.com/go/qs).
HP iLO
The iLO 4 subsystem is a standard component of HP ProLiant servers that simplifies initial server setup, server
health monitoring, power and thermal optimization, and remote server administration. The iLO 4 subsystem
includes an intelligent microprocessor, secure memory, and a dedicated network interface. This design
makes iLO 4 independent of the host server and its operating system.
iLO 4 enables and manages the Active Health System (on page 69) and also features Agentless
Management. All key internal subsystems are monitored by iLO 4. If enabled, SNMP alerts are sent directly
by iLO 4 regardless of the host operating system or even if no host operating system is installed.
Embedded remote support software is available on HP ProLiant Gen8 and later servers with iLO 4, regardless
of the operating system software and without installing OS agents on the server.
To Next Page
Loading...
