Operations 15
CAUTION: Do not operate the server for long periods with the access panel open or removed.
Operating the server in this manner results in improper airflow and improper cooling that can
lead to thermal damage.
1. Place the access panel on the chassis, and then slide it toward the front of the server.
2. Tighten the T-15 screw.
3. Connect each power cord to the server.
4. Connect each power cord to the power source.
IMPORTANT: Be sure that the panel is locked into place securely before powering up the server.
5. Press the Power On/Standby button.
The server exits standby mode and applies full power to the system. The system power LED changes
from amber to green.
To Next Page
Loading...
