HP ProLiant ML10 User Manual

Specifications 60
Specifications
Environmental specifications
Specification Value
Temperature range*
Operating
10
°
C to 35
°
C (50
°
F to 95
°
F)
Nonoperating
-30° C to 60° C (-22° F to 140° F)
Relative humidity
(noncondensing)
Operating, maximum wet bulb
temperature of 28°C (82.4°F)
10% to 90%
Nonoperating, maximum wet
bulb temperature of 38.7°C
(101.7°F)
5% to 95%
* All temperature ratings shown are for sea level. An altitude derating of 1° C per 304.8 m (1.8° F per 1,000 ft) to 3048
m (10,000 ft) is applicable. No direct sunlight allowed.
Server specifications
Specification Value
Dimensions
Height
36.39 cm (14.3 in)
Depth
38.1 cm (15 in)
Width
16.5 cm (6.5 in)
Weight
5.94 kg (13.08 lb)
Power supply specifications
The server supports one HP 300 W Integrated Power Supply.
CAUTION: Check the system and power supply input ratings before powering up the server.
Specification Value
Input requirements
Rated input voltage
100 V to 240 V
Rated input frequency
50Hz to 60Hz
Rated input current
4 A at 100 VAC to 200 VAC

HP ProLiant ML10 Specifications

General

Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E3-1200 v3
Memory	Up to 32 GB
Drive Bays	4 LFF
Power Supply	300W
Chipset	Intel C222
Expansion Slots	1 PCIe 3.0 x16, 1 PCIe 2.0 x1
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
RAID Support	Integrated SATA RAID controller (Intel Rapid Storage Controller); optional HP Smart Array controllers