HP ProLiant ML10 User Manual

Setup 19
For more information on the automatic configuration, see the HP ROM-Based Setup Utility User Guide.
Installing the operating system
To operate properly, the server must have a supported operating system installed. For the latest information
on supported operating systems, see the HP website (http://www.hp.com/go/supportos).
You can install an operating system manually—Insert the operating system CD into the DVD-ROM drive, and
then reboot the server. You might have to obtain additional drivers from the HP website
(http://www.hp.com/support).
For more information, see the SmartStart installation poster in the HP ProLiant Essentials Foundation Pack
included with the server.
Registering the server
To experience quicker service and more efficient support, register the product at the HP Product Registration
website (http://register.hp.com).

HP ProLiant ML10 Specifications

General

Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E3-1200 v3
Memory	Up to 32 GB
Drive Bays	4 LFF
Power Supply	300W
Chipset	Intel C222
Expansion Slots	1 PCIe 3.0 x16, 1 PCIe 2.0 x1
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
RAID Support	Integrated SATA RAID controller (Intel Rapid Storage Controller); optional HP Smart Array controllers