HP ProLiant ML10 User Manual

Hardware options installation 22
Be sure to install the drive with the sticker facing up and the connectors facing toward the rear.
9. Insert the drive carrier halfway into the media bay.
10. Connect the SATA cable and power cable (P6) to the rear of the drive.

HP ProLiant ML10 Specifications

General

Memory Slots	4
Form Factor	Tower
Processor	Intel Xeon E3-1200 v3
Memory	Up to 32 GB
Drive Bays	4 LFF
Power Supply	300W
Chipset	Intel C222
Expansion Slots	1 PCIe 3.0 x16, 1 PCIe 2.0 x1
Operating System Support	Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware ESXi
RAID Support	Integrated SATA RAID controller (Intel Rapid Storage Controller); optional HP Smart Array controllers