To Next PageTo Next Page
Need help?Do you have a question about the HP ProLiant ML350p Gen8 and is the answer not in the manual?
General| Processor | Intel Xeon E5-2600 series |
|---|---|
| Maximum Processors | 2 |
| Chipset | Intel C600 Series |
| Memory Type | DDR3 RDIMM or UDIMM |
| Maximum Memory | 768 GB |
| Memory Slots | 24 DIMM slots |
| RAID Support | HP Smart Array P420i/1GB FBWC |
| Storage Controller | HP Smart Array P420i/1GB FBWC |
| Network Controller | HP Ethernet 1Gb 4-port 331FLR Adapter |
| Form Factor | Tower |
| Storage | SAS, SATA, SSD |
| Network | Gigabit Ethernet |
| Power Supply | 460W, 750W, 1200W |
| Power Supply Options | Redundant Power Supplies |
| Operating System Support | Microsoft Windows Server, Red Hat Enterprise Linux, SUSE Linux Enterprise Server, VMware |
Identifies and illustrates components located on the server's front panel.
Details the status indicators and controls on the server's front panel.
Identifies and illustrates components located on the server's rear panel.
Details the status indicators on the server's rear panel.
Identifies and illustrates the main components on the server's system board.
Explains the function and configuration of the system maintenance switch.
Describes the Non-Maskable Interrupt (NMI) feature for crash dump analysis.
Explains the purpose and use of the NMI header for memory dumps.
Identifies and explains the server's DIMM slot numbering and layout.
Illustrates and describes the Systems Insight Display LEDs on the system board.
Explains how LED combinations indicate system status and health events.
Details the numbering scheme for SAS and SATA drive bays.
Explains the status and meaning of LEDs on hot-plug drive carriers.
Describes the server's fan configuration and redundancy.
Identifies connectors on the RPS riser board for power distribution.
Provides step-by-step instructions for powering on the server.
Details methods for safely shutting down and powering off the server.
Instructions for removing the server's security bezel.
Instructions for installing the server's security bezel.
Procedures for removing the server's tower bezel.
Steps to remove the server's rack bezel.
Steps to install the server's rack bezel.
Instructions for removing the server's access panel.
Instructions for installing the server's access panel.
Steps to extend the server out of its rack enclosure.
Procedure for removing the server's internal air baffle.
Procedure for installing the server's internal air baffle.
Instructions for removing a server fan.
Procedure for removing the server's fan cage assembly.
Steps to remove the server's optical drive.
Procedure for removing a blank from a drive cage.
Information on HP Care Pack services for server installation and support.
Details on resources for planning server rack installations.
Guidance on selecting an optimal environment for server installation.
Specifies required clearances and airflow for proper server operation.
Outlines acceptable operating temperature ranges for the server.
Details electrical power requirements and safety guidelines.
Explains proper grounding procedures for server safety and operation.
Safety warnings and precautions related to rack installations.
General safety warnings and cautions for server operation and handling.
Lists items typically found in the server's shipping carton.
General guidance on installing server hardware options.
Step-by-step guide for setting up the server in a tower configuration.
Detailed instructions for mounting the server into a rack.
Steps for initial server power-up and basic configuration.
Information on installing an operating system on the server.
Guidance on how to register the server with HP.
General advice for installing multiple hardware options.
Instructions for installing a Mini-SAS cable.
Guidance on installing a second processor.
Overview of supported memory types, speeds, and capacities.
Information on HP SmartMemory features and benefits.
Explains the server's memory architecture and channels.
Guidelines for populating DIMM slots correctly.
Step-by-step instructions for installing a DIMM.
Explains classifications of DIMMs and their impact on capacity.
How to identify DIMM characteristics from their labels.
Details different memory configuration modes and AMP modes.
Guidelines for populating DIMM slots for Advanced ECC mode.
Guidelines for configuring Online Spare memory.
Guidelines for configuring Lockstep memory mode.
Instructions for installing an optical drive cage.
Instructions for installing an optical drive.
Information and instructions for installing redundant power supplies.
Guidelines for installing hot-plug SAS drives.
Steps to remove a drive blank from a bay.
Instructions for installing a hot-plug drive.
General procedure for installing expansion boards.
Information on supported graphic card options and slot recommendations.
Step-by-step guide for installing a graphic card adapter.
Overview of the server's controller options and features.
Instructions for installing a storage controller.
Procedures for installing cache modules and FBWC capacitor packs.
Information on the redundant fan configuration.
Guidelines for implementing redundant fan configurations.
Steps for installing a hot-plug redundant fan.
Information about the eight-bay SFF drive cage option.
Instructions for installing an SFF hot-plug drive cage.
Information about the six-bay LFF drive cage option.
Instructions for installing an LFF hot-plug drive cage.
Information about drive backplane expander options.
Steps to install the 6-bay LFF drive backplane expander.
Steps to install the 8-bay SFF drive backplane expander.
Information on the HP Trusted Platform Module (TPM) option.
Instructions for installing the TPM board.
Guidance on securely retaining BitLocker recovery keys/passwords.
Steps to enable the Trusted Platform Module in the OS.
Illustrates and describes data cabling for server components.
Shows cabling connections for media devices.
Illustrates the data and power cabling for the optical drive.
Lists software utilities and their operating modes (online/offline).
Information source for product features and specifications.
Overview of the embedded server management engine.
Details the HP iLO 4 subsystem for server management.
Explains the AHS feature for system monitoring and diagnostics.
Describes the IML for recording and viewing system events.
Information on the server deployment and OS installation tool.
Tool for system diagnostics and troubleshooting.
Describes survey functionality for hardware/software information.
Software for enhanced warranty and support services.
Tool for automating server deployment installations.
Comprehensive firmware and system software update package.
Utility for installing and updating server firmware and software.
Utility for system configuration during boot.
How to navigate and use the ROM-Based Setup Utility.
Automatic system configuration during the first boot.
Explains Advanced Memory Protection (AMP) modes.
Procedure to re-enter serial number and product ID after system board replacement.
Overview of various system utilities and features.
Utility for configuring disk arrays.
Utility for configuring RAID levels and logical drives.
Utility for upgrading system firmware (BIOS).
Feature for automatically restarting the server after OS errors.
Information on USB support, including legacy support.
Explains the server's redundant ROM capability.
Guidance on maintaining system software and firmware.
Information on installing and updating device drivers.
Recommendations for updating software and firmware.
Tools for managing software and firmware versions.
Information on supported OS and virtualization software.
HP's notification service for upcoming changes.
Lists guides and resources for server troubleshooting.
Information on safety, environmental, and regulatory compliance.
Declaration regarding RoHS material content for Turkey.
Declaration regarding RoHS material content for Ukraine.
Links and information regarding HP product warranties.
Precautions to prevent damage from static electricity.
Various methods for proper grounding to prevent ESD.
Details environmental operating conditions for the server.
Provides physical dimensions and weight specifications for the server.
Lists specifications for various server power supply options.
Information to have ready before contacting HP support.
Details on how to contact HP support.
Information about HP's Customer Self Repair program.
