3.4 Rack installation
Warning: To reduce the risk of personal injury or damage to the equipment, be sure that:
• The leveling feet are extended to the oor.
• The full weight of the rack rests on the leveling feet.
• The stabilizing feet are attached to the rack if it is a single-rack installation.
• The racks are coupled together in multiple-rack installations.
• Only one component is extended at a time. A rack may become unstable if more than one
component is extended for any reason.
Note: If preparing the rails for integrated shipping, follow the same rack installation instructions.
Note: Mounting hardware for square- and round-holed racks is included in the UPS kit.
To Next Page
Loading...
Need help?
General
