1
1 Safety and Regulatory Information
For your protection, this product has been tested for conformance to various national and
international regulations and standards. The scope of this regulatory testing includes electrical
and mechanical safety, electromagnetic emissions, immunity, ESD, acoustics, and hazardous
materials.
Where required, certifications are obtained from third party test agencies. Certification marks
appear on the product label. In addition, various regulatory bodies require some information
under the headings below.
This product and related documentation must be reviewed for familiarization with safety
markings and instructions before operation.
WARNING The WARNING sign denotes a hazard. It calls attention to a procedure,
practice, or situation which, if not done correctly or adhered to, could result
in injury. Do not proceed beyond a WARNING sign until the indicated
conditions are fully understood and met.
CAUTION The CAUTION sign denotes a hazard. It calls attention to an operating
procedure, practice, or situation which, if not done correctly or adhered to,
could damage or destroy part or the entire product. Do not proceed beyond a
CAUTION sign until the indicated conditions are fully understood and met.
Safety Warnings
The following warnings and cautions are applicable to the System/E rack. Please observe all
safety precautions and warnings.
This product has not been evaluated for connection to an IT power system (an AC distribution
system having no direct connection to earth (ground)- according to EN60950.
Grounding
WARNING This is a safety class I product and has a protective earthing (grounding)
terminal. There must be an uninterruptable safety earth ground from the
main power source to the product’s input wiring terminals, power cord, or
supplied cord set. Whenever it is likely that the protection has been
impaired, disconnect the power cord until the ground has been restored.
To Next Page
Loading...
