HP Rack System/E - Physical Specifications

Chapter 2 Description
4
Figure 2-2. Two Views of Tied racks showing Accessories
Physical Specifications
The physical specifications for the System/E racks are given below.
Packaged Height Width Depth Weight
1.25m (E25) Rack 1.48 m (58.5 in) 1.016 m (40 in) 1.22 m (48 in) 124.5 kg (274 lbs)
1.6m (E33) Rack 1.84 m (72.5 in) 1.016 m (40 in) 1.22 m (48 in) 133.2 kg (293 lbs)
1.96m (E41) Rack 2.2 m (86.5 in) 1.016 m (40 in) 1.22 m (48 in) 142.7 kg (314 lbs)
Unpackaged
1.25m (E25) Rack 1.26 m – 25U
(49.5 in)
59.7 cm (23.5 in) 92.7 cm (36.5 in) 72.7 kg (160 lbs)
1.6m (E33) Rack 1.61 m – 33U
(63.5 in)
59.7 cm (23.5 in) 92.7 cm (36.5 in) 78.6 kg (173 lbs)
1.96m (E41) Rack 1.97 m – 41U
(77.5 in)
59.7 cm (23.5 in) 92.7 cm (36.5 in) 85.5 kg (188 lbs)
The following parts are standard with every System/E rack.
Top Cap and Forehead
The top cap is 16-gauge, cold rolled
steel (CRS). The top cap and forehead
are attached at the factory. The top of
the rack incorporates a ventilation path
through the roof of the rack and a
convection current heat exit for the heat
generated by the installed equipment.
Heat removal can be augmented with an
extractor fan assembly.