EasyManuals Logo

HP Spectre x360 15 User Manual

HP Spectre x360 15
89 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #37 background imageLoading...
Page #37 background image
Bottom cover
NOTE: The bottom cover spare part does not include the rubber foot. The rubber kit spare part number is
L15592-001.
Description Spare part number
Bottom cover in Dark Ash Silver L15591-001
IMPORTANT: Make special note of each screw and screw lock size and location during removal
and replacement
Before removing the bottom cover, follow these steps:
1. Shut down the computer.
2. Disconnect all external devices connected to the computer.
3. Disconnect the power from the computer by rst unplugging the power cord from the AC outlet and then
unplugging the AC adapter from the computer.
Remove the bottom cover:
1. Remove the rubber foot covering four of the screws that secure the bottom cover to the computer (1).
2. Remove the four Phillips PM2.0×10.0 screws (2).
3. Remove the two Phillips PM2.0×3.5 screws (3).
Component replacement procedures 29

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP Spectre x360 15 and is the answer not in the manual?

HP Spectre x360 15 Specifications

General IconGeneral
Display Size15.6 inches
Ports2 x Thunderbolt 4, 1 x USB-A, 1 x HDMI, 1 x Headphone/Microphone Combo
RAM16GB
GraphicsIntel Iris Xe Graphics
Operating SystemWindows 10
Battery LifeUp to 12 hours
Weight1.92 kg
WirelessWi-Fi 6 (802.11ax), Bluetooth 5.0
Resolution3840 x 2160 (4K UHD)
Storage512GB SSD

Related product manuals