Fabric OS 6.2 administrator guide 115
Port configuration
Table 23 provides information on ports that the switch uses. When configuring the switch for various
policies, take into consideration firewalls and other devices that may sit between switches in the fabric and
your network or between the managers and the switch.
Table 23 Port information
Port Type Common use Comment
22 TCP SSH n/a
23 TCP Telnet Use the ipfilter command to block the port.
80 TCP HTTP Use the ipfilter command to block the port.
111 TCP sunrpc This port is used by Platform API. Use the ipfilter
command to block the port.
123 TC P N T P n/ a
161 UDP SNMP Disable the SNMP service on the remote host if you do not
use it, or filter incoming UDP packets going to this port.
443 TCP HTTPS Use the ipfilter command to block the port.
512 T C P e x e c n / a
513 TC P l o g i n n / a
514 TCP shell n/a
897 TCP This port is used by the Platform API. Use the configure
command to disable this port.
To Next Page
Loading...
Need help?
General