HP StorageWorks P9000 - Disk Arrays Configuration Guide

• http://www.hp.com/storage/spock
Conventions for storage capacity values
HP P9000 storage systems use the following values to calculate physical storage capacity values
(hard disk drives):
•
1 KB (kilobyte) = 1,000 (10
3
) bytes
•
1 MB (megabyte) = 1,000
2
bytes
•
1 GB (gigabyte) = 1,000
3
bytes
•
1 TB (terabyte) = 1,000
4
bytes
•
1 PB (petabyte) = 1,000
5
bytes
•
1 EB (exabyte) = 1000
6
bytes
HP P9000 storage systems use the following values to calculate logical storage capacity values (logical
devices):
• 1 block = 512 bytes
•
1 KB (kilobyte) = 1,024 (2
10
) bytes
•
1 MB (megabyte) = 1,024
2
bytes
•
1 GB (gigabyte) = 1,024
3
bytes
•
1 TB (terabyte) = 1,024
4
bytes
•
1 PB (petabyte) = 1,024
5
bytes
•
1 EB (exabyte) = 1024
6
bytes
HP product documentation survey
Are you the person who installs, maintains, or uses this HP storage product? If so, we would like to
know more about your experience using the product documentation. If not, please pass this notice to
the person who is responsible for these activities.
Our goal is to provide you with documentation that makes our storage hardware and software products
easy to install, operate, and maintain. Your feedback is invaluable in letting us know how we can
improve your experience with HP documentation.
Please take 10 minutes to visit the following web site and complete our online survey. This will provide
us with valuable information that we will use to improve your experience in the future.
http://www.hp.com/support/storagedocsurvey
Thank you for your time and your investment in HP storage products.
Support and other resources28

HP StorageWorks P9000 - Disk Arrays Specifications

General

Brand	HP
Model	StorageWorks P9000 - Disk Arrays
Category	Storage
Language	English