Figure 1 SNMP configuration
.
RAID Manager command devices
HP StorageWorks P9000 RAID Manager Software manages HP StorageWorks P9000 Business Copy
Software or HP StorageWorks P9000 Continuous Access Synchronous Software operations from a
host server. To use RAID Manager, you must designate at least one LDEV as a command device. This
can be done with Remote Web Console Software or P9000 Command View Advanced Edition Suite
Software. For information about how to designate a command device, see the applicable user guide.
Creating scripts to configure all devices at once may save you considerable time.
Installation roadmap
Perform these actions to install and configure the disk array:
1. Installing and configuring the disk array
• Defining the paths
• Setting the host mode and host group mode
• Setting the system option modes
• Configuring the Fibre Channel ports
2. Installing and configuring the host
• Loading the operating system and software
• Installing and configuring the FCAs
• Clustering and fabric zoning
• Fabric zoning and LUN security for multiple operating systems
3. Connecting the disk array
• Verifying host recognition of disk array devices
4. Configuring disk array devices
• Changing the device parameters
• Assigning the new devices to volume groups
• Creating the Journaled File Systems
• Mounting and verifying the file systems
Installing and configuring the disk array
The HP service representative performs these tasks:
P9000 Configuration Guide: IBM AIX 9
To Next Page
Loading...
