151U Rackmount Tape Enclosure Reference Guide
2
Rack Installation
Rail mounting kit
The rack rails supplied with the 1U rackmount tape enclosure can be used to
install the unit in racks that have round, square, or threaded holes in the vertical
mounting bars. The rails will fit racks with 23 - 34 inches (58 - 86 cm) separation
between the front and rear vertical mounting bars. The rails are identical and may
be mounted on either the left or the right side.
Figure 5: Rail mounting kit components
1 Outer rack rails
2 Inner component rails
3 Cable support clips
15121a
1
2
3
To Next Page
Loading...
Need help?
General