HP StoreOnce 2700 - Gbit Ethernet Port Leds

Online Activity LED
(green)
Fault/UID LED (amber/
blue)
Interpretation
On Amber flashing regularly A predictive failure alert has been received for
this drive. Replace the drive as soon as
possible.
On Off The drive is online, but it is not currently active.
Flashing regularly (1 Hz) Amber flashing regularly
Do not remove the drive. Removing a drive
may terminate the current operation and
cause data loss.
The drive is part of an array that is undergoing
capacity expansion or a stripe size migration,
but a predictive failure alert has been received
for this drive. To minimize the risk of data loss,
do not replace the drive until the expansion or
migration is complete.
Flashing regularly (1 Hz) Off
Do not remove the drive. Removing a drive
may terminate the current operation and
cause data loss.
The drive is rebuilding, or it is part of an array
that is undergoing array expansion, logical
drive extension, a stripe size migration, or RAID
migration.
Flashing irregularly Amber flashing regularly (1
Hz)
The drive is active, but a predictive failure alert
has been received for this drive. Replace the
drive as soon as possible.
Flashing irregularly Off The drive is active and it is operating normally.
Off Off A critical fault condition has been identified for
this drive and the controller has placed it offline.
Replace the drive as soon as possible.
Off Amber flashing regularly A predictive failure alert has been received for
this drive. Replace the drive as soon as
possible.
Off Off The drive is offline, a spare, or not configured
as part of an array.
1 Gbit ethernet port LEDs
The 1 Gbit ethernet LAN ports have two LEDs on the rear of the HPE StoreOnce Backup system.
68 1 Gbit ethernet port LEDs