Figure 34: 1 Gbit ethernet LAN port LEDs (example shows HPE StoreOnce 4900 Backup)
1. LAN network speed LED
indicator
Steady green: The LAN connection is using 10 Mbps/100 Mbps link.
Steady amber: The LAN connection is using a 1 Gbit ethernet link.
Off: No connection.
2. LAN activity status LED
indicator
Flashing green: Ongoing network data activity.
Off: No network data activity or no connection.
10 Gbit ethernet card LEDs
Each 10 Gbit ethernet card has two LEDs, as illustrated below.
Figure 35: 10 Gbit ethernet card LEDs (example shows HPE StoreOnce 4700 Backup)
1. Link Off: No link to the adapter is established. The adapter is not receiving power or the
cable connection is faulty
On (yellow): Link to the adapter is established. The adapter is receiving power and
the cable connection is good.
2. Activity Flashing green: Ongoing network data activity. The adapter is sending or receiving
network data at up to 10 Gb/s
Off: No network data activity or no connection.
Fibre Channel card LEDs
HPE StoreOnce Backup systems that support Fibre Channel have three LEDs adjacent to each FC port.
10 Gbit ethernet card LEDs 69
To Next Page
Loading...
