c. Remove the display panel assembly (5).
The display panel assembly is available using spare part numbers 906791-001 (11.6-in, HD, WLED,
AntiGlare (1366×768), slim (3.0-mm), SVA, eDP) and 906792-001 (11.6-in, HD, WLED, AntiGlare
(1366×768), slim (3.0-mm), IPS/UWA, eDP).
15. If it is necessary to replace the webcam/microphone module:
a. Remove the display panel assembly.
CAUTION: Before turning the display panel assembly upside down, make sure the work surface is
clear of tools, screws, and any other foreign objects. Failure to follow this caution can result in
damage to the display panel assembly.
b. Turn the display panel assembly upside down.
c. Disconnect the webcam/microphone module cable (1) from the webcam/microphone module.
60 Chapter 5 Removal and replacement procedures
To Next Page
Loading...
Need help?
General