HP T5530 - Compaq Thin Client User Manual

5. If you want to add or change SNMP security settings, click the Security tab.
6. To enable an authentication failure trap, select Enable Authentication Failure Trap.
7. Select the hosts from which SNMP packets may be accepted. Choose either Accept SNMP
packets from any host or Accept SNMP packets from these hosts.
8. Click OK after entering all the necessary SNMP information.
ENWW
SNMP
63

HP T5530 - Compaq Thin Client Specifications

General

Brand	HP
Model	T5530 - Compaq Thin Client
Category	Server
Language	English