HP t610 Series User Manual

SATA1 Device available Device hidden
SATA2 Device available Device hidden
Network Service
Boot
Disable Enable
Enter Ownership
Tag
na na
Enter UUID na na
Data Execution
Prevention
Disable Enable
SVM CPU
Virtualization
Disable Enable
Activate Embedded
Security On Next
Boot
Disable Enable
Embedded Security
Activation Policy
F1 to Boot Allow user to reject, No Prompts
OS management of
Embedded Security
Device
Disable Enable
Reset of Embedded
Security Device
through OS
Disable Enable
Master Boot Record
Security
Disable Enable
Runtime Power
Management
Enable Disable
Idle Power Savings Extended Normal, Auto
Unique Sleep State
Blink Rates
Disable Enable
S5 Maximum Power
Savings
Disable Enable
SATA Power
Management
Disable Enable
Fan Idle Mode + ++, +++, ++++, +++++, ++++++
POST Mode QuickBoot FullBoot, FullBoot Every 07 Days, 14 Days, 21 Days, 28 Days, Clear Memory
POST Messages Disable Enable
Press ESC for
Startup Menu
Prompt
Enable Disable
Option ROM Prompt Enable Disable
Remote Wakeup
Boot Source
Local Hard Drive Remote Server
After Power Loss Off On Previous State
44 Chapter 4 Computer Setup (F10) Utility, BIOS Settings

HP t610 Series Specifications

General

Power Supply	65W external power adapter
Processor	AMD G-T56N APU with Radeon HD 6320 Graphics (1.65 GHz, 1 MB L2 cache)
Graphics	AMD Radeon HD 6320 Graphics
Memory	4 GB DDR3 SDRAM
Storage	500 GB HDD
Networking	Gigabit Ethernet
USB Ports	6 x USB 2.0 (2 front, 4 rear)
Operating System	HP ThinPro, Windows Embedded Standard 7
Chipset	AMD A55E
Ports	1 serial, 1 parallel