10.
Remove the system board shield (see
System board shield on page 28).
11. Remove the processor thermal kit as follows:
a. Disconnect the fan cable from the system board (1).
b. Remove the four screws that secure the fan to the system board (2).
c. Loosen the four captive screws in the order indicated on the heat sink (3).
d. Lift the thermal kit from the system board.
12. Rotate the locking lever to its full open position (1).
13.
Raise and rotate the microprocessor retainer to its full open position (2)
Processor
39
To Next Page
Loading...
