EasyManuals Logo

HP TOUCHSMART 9100 User Manual

HP TOUCHSMART 9100
72 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #33 background imageLoading...
Page #33 background image
Welcome 27
Installing a Security Lock
A security lock (sold separately) enables you to secure your computer from theft and unwanted changes.
A security lock is a key lock device that has a wire cable attached. You attach one end of the cable to your
desk (or other stationary object) and the other to this security slot on the computer. Secure the security lock
with the key.
Cleaning the HP TouchSmart 9100 Screen
Before cleaning the touch screen, you must disable it by turning off the computer. If the computer is not
turned off, the touch screen is enabled, and you could lose data while cleaning it.
For optimal touch performance, the HP TouchSmart 9100 screen requires periodic cleaning to remove any
particles on the sides and surface of the screen. The touch screen has a glass surface that can be cleaned
by using the cleaning cloth that came with your HP TouchSmart 9100. You can also use a soft cloth or
paper towel dampened with a typical household glass cleaner to clean the touch screen.
To achieve the best touch sensitivity, keep the screen clean from foreign objects. Avoid excessive dust
accumulation on all sides and edges of the screen.
To clean the touch screen:
1 Turn off the computer. Tap the Start button, and then tap Shut Down.
2 Disconnect the power cord from the wall.
3 Spray a small amount of a mild glass cleaner onto the cleaning cloth that came with your
HP TouchSmart 9100. You can also use a soft cloth or paper towel dampened with a typical
household glass cleaner to clean the touch screen.
4 Wipe the surface and each side of the touch screen to remove any dirt, fingerprints, or other debris
that could hinder the touch recognition of the screen.
.
CAUTION: Do not spray or place the cleaner directly on the screen; spray the cleaner into the
cloth, and then wipe the sides and surface of the touch screen.
Do not use an abrasive cleaner or cloth when cleaning the sides or the surface of the screen,
because this could cause damage to the touch screen.

Table of Contents

Other manuals for HP TOUCHSMART 9100

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the HP TOUCHSMART 9100 and is the answer not in the manual?

HP TOUCHSMART 9100 Specifications

General IconGeneral
Processor cache2 MB
Processor cores2
Processor familyIntel® Core™2 Duo
Processor frequency2.1 GHz
Processor cache typeL3
Processor manufacturerIntel
Processor front side bus800 MHz
Chassis typeAll-in-One
Display includedYes
Cabling technology10/100/1000Base-T(X)
Networking featuresGigabit Ethernet
Graphics card familyNVIDIA
Floppy drive installedNo
Parallel ports quantity0
Maximum graphics card memory- MB
Compliance industry standardsIEEE 802.3, IEEE 802.3u, IEEE 802.3ab
Number of processors installed1
Internal memory4 GB
Memory clock speed1333 MHz
Internal memory typeDDR3-SDRAM
Maximum internal memory- GB
HDD interfaceSATA
Optical drive typeDVD Super Multi
Discrete graphics card modelNVIDIA GeForce 200
Operating system installedWindows 7 Professional
USB 2.0 ports quantity5
Ethernet LAN data rates10, 100, 1000 Mbit/s
Product colorBlack
Country of originChina
Weight and Dimensions IconWeight and Dimensions
Depth (with stand)72 mm
Width (with stand)579 mm
Height (with stand)447 mm
Weight (with stand)11500 g

Related product manuals