English 33
3 Replacing Hardware Components
Which Drive Connectors To Use
Which Drive Connectors To Use
Internal drives, such as hard disk drives, DVD drives, and CD-ROM
drives, must be connected to data and power cables. When replacing
these drives, ensure you use the correct data and power connectors.
Hard disk drives should always be connected to the primary IDE
controller. CD-ROM and CD-R/W drives should always be connected to
the secondary IDE controller.
CD-ROM, DVD or Zip drive
Floppy drive
2nd hard disk drive
Master (boot) hard disk drive
gap.bk : gap-3.fb4 Page 33 Friday, January 15, 1999 5:03 PM
To Next Page
Loading...
