E Appendix E — Routine care
General cleaning safety precautions
●
Never use solvents or flammable solutions to clean the workstation.
●
Never immerse any component in water or cleaning solutions; apply any liquids to a clean cloth
and then use the cloth on the component.
●
Always unplug the workstation before cleaning the keyboard, mouse, or air vents.
●
Always disconnect the keyboard before cleaning it.
●
Wear safety glasses equipped with side shields when cleaning the keyboard.
Maximizing the airflow
●
Keep your workstation in an area where the airflow is not obstructed.
●
Keep the unit off of surfaces where dust can gather.
●
Keep the front of the unit clear of any obstruction.
●
Remove any dust on the front panel (vent area) and the rear fans with a small vacuum, compressed
air, or dust rag.
●
Keep the back of the unit at least 0.15 m (6 in.) away from a wall or other obstruction.
Cleaning the workstation case
●
Follow the safety precautions presented in before cleaning the workstation.
●
To remove light stains or dirt, use plain water with a clean, lint-free cloth or swab.
●
For stronger stains, use a mild dish-washing liquid diluted with water. Rinse well by wiping it with
a cloth or swab dampened with clear water.
ENWW General cleaning safety precautions 151
To Next Page
Loading...
