3. Lift the DIMM (2) straight up and remove it from the unit. Store the DIMM in an anti-static bag.
Figure 4-17 Removing memory module
Memory module features
●
Contains four memory slots for DIMMs
●
Supports 256-MB to 8-GB configurations
●
Supports dual-channel DIMMs
Memory module requirements
CAUTION: HP only ships DIMMs that are electrically and thermally compatible with this product.
Because third-party DIMMs might not be electrically or thermally compatible, they are not supported by
HP.
NOTE: DIMMs and their sockets are keyed for proper installation. Be sure these guides line up when
installing DIMMs.
●
Use only industry-standard, unbuffered, PC2–4200 (533 MHz) or PC2–5300 (667 MHz) DIMMs.
●
Match DIMM pairs by size and type
ENWW Steps for removal and replacement of components 71
To Next Page
Loading...
