Power connections to drives
For help in identifying power cables, refer to the following information. Route or tie cables so that there
is no possible way for them to interfere with the CPU heatsink fans.
Figure 4-31 Identifying the correct power connections for a typical configuration
Connector Description
P1 Main power on system board
P2 N/A
P3 CPU power
P4 PCI Express graphic auxiliary
P5 PCI auxiliary (e.g. 1394)
P6 ODD IDE top bay
P7 ODD IDE mid bay
P8 FDD
P9 Third HDD SATA bottom ODD bay
P10 Fourth HDD SATA mid ODD bay
P11 ODD IDE or 3rd HDD SAS ODD bottom bay
P12 First HDD SATA bottom HDD bay
P13 Second HDD SATA top HDD bay
P14 First HDD SAS bottom HDD bay
P15 Second HDD SAS top HDD bay
82 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
