Devicen ame Device class Position
number
Controller name Device
number
DVD drive 2 2 Secondary 0
CD-ROM drive 3 3 Secondary 1
Installing drive order (2)
Example 2: Four device installation sample
A system has four devices: Ultra ATA-100 hard drive, Ultra ATA-100 hard drive, DVD-CDR/W drive,
and a ZIP-250 drive.
●
Ultra ATA-100 hard drive = Class 1
●
Ultra ATA-100 hard drive = Class 1
●
DVD-CDR/W drive = Class 2
●
ZIP-250 drive = Class 4
Table C-5 Attach sequence worksheet—Four device installation (sample)
Device name Device
class
Position
number
Controller name Device
number
Ultra ATA-100 hard drive 1 1 Primary 0
DVD-CDR/W drive 2 2 Secondary 0
ZIP-250 drive 4 3 Secondary 1
Ultra ATA-100 hard drive* 1 4 Primary 1
*If there are three or more devices, two or more of which are hard drives, two hard drives should be attached to the primary
controller first before following the general attach sequence rule.
Table C-4 Attach sequence worksheet—Three device installation (sample) (continued)
146 Appendix C Appendix C — Ultra ATA devices ENWW
To Next Page
Loading...
