Item Description Item Description Item Description Item Description
** The PCI Express x8 is a PCI Express x8 connector that has x4 bandwidth.
System board architecture
The following image shows the HP xw8400 Workstation block diagram.
Figure 4-2 System board block diagram
Removing and replacing components
This section discusses the procedures necessary to remove and install various hardware components
on your workstation.
Before servicing or upgrading your workstation:
1. Review the safety precautions and the
Service considerations on page 46, as well as the Safety
and Regulatory Information.
2. Locate and clear a suitable work area.
3. Shut down the system and remove power from the unit.
4. Gather your tools.
5. Remove all security devices.
6. Service your unit.
7. Restore power to your unit.
Table 4-3 System board components (continued)
52 Chapter 4 Removal and replacement procedures ENWW
To Next Page
Loading...
