NOTE: Prior to removing and replacing a component, make sure you remove all installed components
that obstruct or prevent the removal of the component.
If you are unsure how to remove a particular component, please do one of the following:
1. Refer to the appropriate section in this chapter.
2. If the content you desire is not referenced in this chapter, see
www.hp.com/support/
xw8400_manuals and look under “Setup and Install – General” for instructions.
3. See the manufacturer’s web site for instructions for a third party (non-HP) component.
ENWW Removing and replacing components 53
To Next Page
Loading...
