HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI - Planning IRF Fabric Size and the Installation Site; Identifying the Master Switch and Planning IRF Member IDs; Planning IRF Topology and Connections

32
Power on the switch. During the startup process, you can access Boot ROM menus to perform tasks
such as software upgrade and file management. The Boot ROM interface and menu options differ
with software versions. For more information about Boot ROM menu options, see the
software-matching release notes for the device.
After the startup completes, you can access the CLI to configure the switch.
For more information about the configuration commands and CLI, see HPE 5130 HI Switch Series
Configuration Guides and HPE 5130 HI Switch Series Command References.