HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI - 10;100;1000 Base-T Autosensing Ethernet Port LED

59
Table 21 Power supply status LED description
LED mark Status Description
PWR1
Steady green
A power supply is installed in power supply slot 1, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in power supply slot 1, but the power
supply has failed or no power is input to the power supply.
Off No power supply is installed in power supply slot 1.
PWR2
Steady green
A power supply is installed in power supply slot 2, and the power
supply is outputting power correctly.
Steady yellow
A power supply is installed in power supply slot 2, but the power
supply has failed or no power is input to the power supply.
Off No power supply is installed in power supply slot 2.
LED for the port LED mode (MODE)
To show more information about the switch through the port LEDs, the switch provides a MODE LED
to indicate the type of information that the port LEDs are showing.
You can use the LED mode switching button to change the indication of the MODE LED.
Table 22 Description for the MODE LED
LED mark Status Description
MODE
Steady green The port status LEDs are showing port rates.
Flashing green (1 Hz) (available only
for HPE 5130 24G PoE+ 4SFP+
1-slot HI and HPE 5130 48G PoE+
4SFP+ 1-slot HI switches)
The port status LEDs are showing the status of
PoE power supply on the ports.
Flashing yellow
The port status LEDs indicates the IRF member
ID of the switch. For example, if the ports 1 to 5
are steady green, the IRF member ID of the
switch is 5.
10/100/1000Base-T autosensing Ethernet port LED
The switch provides a status LED for each 10/100/1000Base-T autosensing Ethernet port. The port
status LED and the MODE LED indicate the operating state of the 10/100/1000Base-T autosensing
Ethernet port in conjunction.
Table 23 10/100/1000Base-T autosensing Ethernet port LED description
Port mode LED (Mode) status Port LED status Description
Steady green (rate mode)
Steady green
The port is operating at 1000 Mbps. The
port LED fast flashes when the port is
sending or receiving data.
Steady yellow
The port is operating at 10/100 Mbps. The
port LED fast flashes when the port is
sending or receiving data.
Flashing yellow (3 Hz) POST has failed on the port.