HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI - Appendix A Chassis Views and Technical Specifications; Chassis Views; HPE 5130 24 G 4 SFP+ 1-slot HI

44
Appendix A Chassis views and technical
specifications
Chassis views
HPE 5130 24G 4SFP+ 1-slot HI
Figure 46 HPE 5130 24G 4SFP+ 1-slot HI front panel
(1) 10/100/1000Base-T autosensing Ethernet port
(2) 10/100/1000Base-T autosensing Ethernet port LED
(3) Management Ethernet port
(4) Console port (CONSOLE)
(5) Mini USB console port
(6) Port LED mode switching button
(7) USB port
(8) System status LED (SYS)
(9) SFP+ port
(10) LED for the port LED mode (MODE)
(11) Interface card status LED (SLOT)
(12) Power supply 2 status LED (PWR2)
(13) Power supply 1 status LED (PWR1)
(14) SFP+ port LED
(15) Management Ethernet port LED
Figure 47 HPE 5130 24G 4SFP+ 1-slot HI rear panel
(1) Grounding screw
(2) Interface card (optional)
(3) Fan tray 1
(4) Fan tray 2
(5) Power supply 1
(6) Power supply 2 (optional)
The HPE 5130 24G 4SFP+ 1-slot HI switch comes with power supply slot 1 empty and power supply
slot 2 installed with a filler panel. You can install one or two power supplies for the switch as required.
In this figure, two PSR150-A1 (JD362B) AC power supplies are installed in the power supply slots.
For more information about installing and removing a power supply, see "Installing/removing a power
supply."
1 2 3 4 5 6
7
8
9
10
11
12
13
14
15
1 2 3 4 5 6