HPE StoreOnce 5200

• D = Drawer
• I = I/O module
4
3
1
2
Item SAS cable Label color Cable from To
1 0.5 m Red JBOD 1 Drawer 2 IOM A Port 1 JBOD 1 Drawer 1 IOM A Port 2
2 0.5 m Green JBOD 1 Drawer 2 IOM B Port 1 JBOD 1 Drawer 1 IOM B Port 2
3 1 m Red Node Slot 3 Port 1 JBOD 1 Drawer 1 IOM A Port 1
4 2 m Green Node Slot 3 Port 2 JBOD 1 Drawer 2 IOM B Port 2
9. Connect four power cables to the base enclosure. For each drawer, connect each power cable to a
different PDU.
10. Connect the server.
a. Connect the power cables.
Connect each power cable to a separate PDU in the rack.
b. Connect a network cable to LAN port 1.
c. Connect a network cable to the iLO port (recommended).
64 HPE StoreOnce 5250 and 5650 Systems