Controller with a 10GbE card
1. Option card 10GbE ports
2. Built-in 1G ports
On a 10GbE system, only the 10GbE interfaces are bonded in the Configuration setup. The 1GbE ports
can be put in a separate bond later. The 10GbE and 1GbE interfaces must be on different subnets but
can be used simultaneously by assigning different traffic types to the bonds.
Controller with a 10GBase-T card
1. Option card 10GBase-T ports
2. Built-in 1G ports
On a 10GbE system, only the 10GbE interfaces are bonded in the Configuration setup. The 1GbE ports
can be put in a separate bond later. The 10GbE and 1GbE interfaces must be on different subnets but
can be used simultaneously by assigning different traffic types to the bonds.
Install the hardware 31
To Next Page
Loading...
